QSC HP112

HPR122i

12″ 2-way Powered Multipurpose Loudspeaker

HPR122i FrontHPR122i SideHPR122i Rear

HPR122i Monitor

HPR Series loudspeakers are no longer in production.
Please see to the KW Series for recommended replacements.
QSC Audio will continue to support and service these products.

The HPR122i offers performers and audio professionals the power, technology and legendary reliability of QSC amplification combined with the simplicity and convenience of a multipurpose powered loudspeaker system. Whether your application is vocal reinforcement, dance music, or full tilt rock and roll and whether your need is main PA, or stage monitor, suspended or pole mounted, the HPR122i is your solution. With 131 dB of maximum output the HPR122i outperforms molded plastic box systems without significant additional weight or cost.

A 12″ low-frequency woofer with 3″ voice coil is powered by 400 watts of class H power. A neodymium magnet design provides ample motor strength for low end performance without adding unnecessary weight. The 1.4″ diaphragm neodymium compression driver is powered by a 100 watt, class AB+B amplifier and is loaded on a 75º conical horn. It’s the same high-frequency driver you’ll find on the HPR153F 3-way loudspeaker system.

  • Ideally suited for use as main PA or monitor
  • High continuous power: 500 watts total amplifier power
  • 75º conical horn provides predictable coverage regardless of
    cabinet orientation
  • Nine (9) M10 suspension points allow for multiple
    suspended applications
HPR122i HPR122i
SPECIFICATIONS HPR122i
Configuration 12″ 2-way multipurpose powered loudspeaker
Transducers
Low Frequency
High Frequency
12″ neodymium transducer with 3″ voice coil
1.4″ diaphragm compression driver
Frequency Response (-3 dB) 1
Frequency Range (-10 dB) 1
62 Hz – 18 kHz
53 Hz – 22 kHz
Nominal coverage (-6 dB) 75° conical
Maximum SPL (1 meter) 131 dB peak
Amplifier
Power output 400W LF Class H
100W HF Class AB+B
Input impedance 22k balanced
11k unbalanced
Controls Gain
Low-cut filter (Main / Monitor)
Front LED On/Off
Power
Circuit breaker
Indicators Power
Signal
Limit
Cooling Convection
Amplifier protection Thermal and output power limiting
Output short circuit
Overtemperature muting
Driver DC protection
Current consumption at 120 VAC
(1/8 power EIA noise)
1.5A
Enclosure Painted Birch plywood
Finish Black textured paint
Grille Powder coated 16 gauge steel
Suspension/Attachment Points 9 M10 rigging locations
Connectors Balanced female XLR line level input
Balanced male XLR full range line level out
Dimensions 26.9 ” H x 14.7 ” W x 14.9 ” D
(683 mm x 373 mm x 379 mm)
Net weight 60 lbs / 27.2 kg
Available Accessories HPR COVER 122
HPR POLE 31
HPR YOKE 122
HPR M10 KIT
HPR SUS KIT 122